Description

The high demands of today’s progressive freestylers have created the Liquid Force Nirvana! A fully re-designed C-class kite delivering explosive pop, aggressive power, and unsurpassed un-hooked performance.

Key design elements include a 5 strut design, fused hybrid mini bridle, and Liquid Force “Rigid Batten” wind tips make this kite the most rigid, responsive, and one of the most powerful C-kite designs on the market.

 

Combined with being flown on the 5 line CPR control system the kite will exceed all expectations in lift, hang time and power.

 

Diamond Wingtip Design
The proven Diamond Wingtip defines the depower and response of Liquid Force kites. The Diamond Wingtip provides the huge de-power of curved wingtips with the immediate response and tuning input of wide square wingtips. The Liquid Force Diamond Wingtips also provides smooth, constant pull and power through turns while still de-powering the kite.

 

The Diamond wingtip not only provides huge de-power and easier prelaunch over traditional curved wingtips, but provides a rigid structure as well as instant and predictable kite response. The Liquid Force Diamond Wingtip also provides smooth, constant pull and power through turns while still effectively de-powering the kite when needed. Bomb Proof Construction, Glue and Stiched Panel Assembly.

 

EXO Strut Technology - Ultimate Structural Bonding:
Designed and developed by Julien Fillion. The Exo Strut brings strut construction to a new level of rigidity and strength focusing on the areas of the struts that absorb the force of impact on hard crashes and washings in the surf.

USB 3.1 Bridle
The Liquid Force USB 3.1 Bridle is a proven Liquid Force cascade SLE bridle system with one static wingtip pulley. The USB 3.1 provides simple and smooth depower, effortless and instant relaunch together with unmatched reliability which means less swimming and more riding!

 

Superior Quality Canopy Material TEIJIN Ripstop T9600
When most of the kiteboarding brands out there stopped using this very high end material due to cost increases, Liquid Force stood their ground! They strongly believe that the use of Teijn Ripstop T9600 is essential to high quality kite design. Your kite will repeatedly perform like the day it was pulled out of the plastic and hold a much higher resale value.

Nuke Proof Construction
Liquid Force nuke proof construction consists of super reinforced seam construction with each segment glued and double stitched. The entire panel layout of Liquid Force kites is glued and stitched using an overlapped seam assembly.

 

This construction has proven throughout the years to be the strongest on the market. Liquid Force have also discovered the perfect Dacron reinforcement to weight ratio to ensure the highest quality for your investment. Their signature molded EVA leading edge bumpers are light, strong and will protect your LE during self-launch, hard crashes, snow re-launch, and normal everyday wear and tear.

 

When crashing at full power, no other part of the kite absorbs as much impact as the leading edge, specifically the centre of the leading edge. Leading edge segments are beefed up by doubling the amount of Dacron used in production, but only where it’s truly needed. This will not increase the weight of the LE but will give your kite the ability to hit the water hard all day, worry free.

 

Max Flow Inflation One-Pump System
The future is now, and this future is inflated quicker and easier by the LF Max Flow Valve. Imagine a kite that inflates in 40% less time, getting you to the water faster and leaving your friends still pumping on the beach.The LF Max Flow valve can bring it, and only the full range of LF kites has it! This new one way high airflow valve mixed with our completely redesigned, gauge-equipped pump will change your life. Once you go Max Flow, you never go back!

 

Liquid Force CPR (Centreline Push Release) Control System:

 

CPR Control System 2012

For 2012 Liquid Force introduces a brand new kite control system designed around a breakthrough Centre Line Push Release safety system - The Liquid Force CPR!

The Liquid Force release allows riders an instant and effortless safety release of the kite with either hand from the front or back of the bar, to either the 100% de-power flagline or 90% depower mainline leash options.

 

While the primary focus for this new system is on the safety and release advancements, the entire bar has been redesigned and improved.

 

100% De-power Flag Line
The Liquid Force CPR Control System has a 100% De-power flag line leash attachment option.

When hooked to the flag line and the bar of CPR are released, the kite will completely de-power with the riders leash attached to the flag line. This will leave them connected to only one front line, completely flagging and de-powering the kite.

 

90% De-power Option
To utilize the 90% depower leash attachment setting, attach your leash to the end of the mainline.

This set-up will allow the rider to safely and repeatedly depower and disable their kite while still allowing the rider to re-launch and ride again very quickly.

 

Below the bar de-power cleat
The power adjustment mainline runs through a 3d molded cleat, molded into the CPR Chicken Loop. This allows effortless adjustment of the mainline and an exteme amount of de-power, always within reach below the bar, molded cleanly right into the chicken loop surface.

 

Center Line Push Release
The Liquid Force CPR Release is designed for ultimate safety and simplicity, allowing a rider to release the kite with either hand, from the front or back of the bar, always the same, either side, and at any time!

 

Non Mechanical 100% Molded QR Design
The Liquid Force CPR is unique in that it has NO MECHANICAL or METAL parts. Each of the quick release parts are molded plastic and will not rust, seize or corrode and will always function properly in sand, salt, heat or snow.

 

Quick Coded 3D Molded Eva Grip
More comfortable than ever with bold colour coded grip. This bar grip is very easy to see the right / left sides of the bar while flying and even when getting tumbled underwater. You always know which end of the bar to grab.

 

Auto Indexed Chicken Loop
This allows a stiff and constant alignment of the chicken loop to the bar when unhooking / hooking back in. The chicken loop does not flop around and is always aligned correctly with the bar. No need to look to unhook or re-hook!

 

The Kite Only Package includes:

• Liquid Force 2012 Nirvana Kite
• Max Flow Inflation System
• Expanding Bag
• Large Pump
• Repair Kit
• Instruction Manual

The Complete Package includes:

• Liquid Force Nirvana 2012 Kite
• Max Flow Inflation System
• Expanding Bag
• Large Pump
• Repair Kit
• Instruction Manual
• Liquid Force 22m Flying Lines
• Liquid Force CPR Depower 45cm, 50cm or 55cm Control Bar

	* A Harness is required to fly this kite - click for harnesses >>
	* You can learn how-to setup and fly water relaunchable kites using the Kiteboarding Progression DVD - click for info >>

Wind Range

Liquid Force Nirvana Wind Range:

Depower Control Bar

Liquid Force CPR (Centreline Push Release) Control System:

 

CPR Control System 2012

For 2012 Liquid Force introduces a brand new kite control system designed around a breakthrough Centre Line Push Release safety system - The Liquid Force CPR!

The Liquid Force release allows riders an instant and effortless safety release of the kite with either hand from the front or back of the bar, to either the 100% de-power flagline or 90% depower mainline leash options.

 

While the primary focus for this new system is on the safety and release advancements, the entire bar has been redesigned and improved.

100% De-power Flag Line
The Liquid Force CPR Control System has a 100% De-power flag line leash attachment option.

When hooked to the flag line and the bar of CPR are released, the kite will completely de-power with the riders leash attached to the flag line. This will leave them connected to only one front line, completely flagging and de-powering the kite.

 

90% De-power Option
To utilize the 90% depower leash attachment setting, attach your leash to the end of the mainline.

This set-up will allow the rider to safely and repeatedly depower and disable their kite while still allowing the rider to re-launch and ride again very quickly.

 

Below the bar de-power cleat
The power adjustment mainline runs through a 3d molded cleat, molded into the CPR Chicken Loop. This allows effortless adjustment of the mainline and an exteme amount of de-power, always within reach below the bar, molded cleanly right into the chicken loop surface.

 

Center Line Push Release
The Liquid Force CPR Release is designed for ultimate safety and simplicity, allowing a rider to release the kite with either hand, from the front or back of the bar, always the same, either side, and at any time!

 

Non Mechanical 100% Molded QR Design
The Liquid Force CPR is unique in that it has NO MECHANICAL or METAL parts. Each of the quick release parts are molded plastic and will not rust, seize or corrode and will always function properly in sand, salt, heat or snow.

 

Quick Coded 3D Molded Eva Grip
More comfortable than ever with bold colour coded grip. This bar grip is very easy to see the right / left sides of the bar while flying and even when getting tumbled underwater. You always know which end of the bar to grab.

 

Auto Indexed Chicken Loop
This allows a stiff and constant alignment of the chicken loop to the bar when unhooking / hooking back in. The chicken loop does not flop around and is always aligned correctly with the bar. No need to look to unhook or re-hook!

 

Liquid Force Nirvana CPR Control Bar
Nirvana	Control Bar Size
5.0	45cm CPR
7.0	45cm CPR
9.0	45cm CPR
11.0	50cm CPR
13.0	55cm CPR
15.0	55cm CPR

 

Reviews

Be the first to review this product! >>

Submit a Product Review for this product >>