Ozone R1 V3 Kite >>
The Ozone R1 V3 design is derived from the incredibly successful R1 V2. The race winning performance of the R1 V2 is very easy to tap into, which made it the benchmark kite in the racing scene.
Ozone have refined the design for the V3, taking it to the next level without compromising accessibility to the R1s supercharged performance. A re-designed internal structure increases strength and support without additional weight. Re-calculated bridal line diameters reduce overall line drag by 14%.
By utilising the ultra high performance V2 design and combining these performance enhancements we have found an overall increase in performance giving the hard-core racer.
Riding on snow or land is easy, with plenty of power and handling in light winds to be clocking high speeds and long airtime.
On the water with a Twin-tip the R1 is a light wind monster; loads of speed and is easy to jump. Due to the abundance of power and efficiency gaining upwind ground is ridiculously easy, in light wind its impressive how high and floaty jumps can be with the R1.
If you race - water, land or snow you need to have a serious look at one of these. The R1 has all the technology you can imagine. The upwind performance is blazing and it can also hold a very deep downwind line.
One other noticeable benefit is how much easier it is to tack when riding with a Foil board or Course board. This is thanks to the longer lifting period the R1 gives you during that critical tacking moment compared to an LEI.
High Cell Count:
Edge Air Intakes:
Kevlar Bridle Lines:
Velcro and Water
Ozone R1 V3 Features include:
The Ozone R1 V3 is available as kite only (with bag) or ready to fly with:
Depower Control Bar
Ozone Race Control Control Bar System:
The Ozone Race Control System offers the latest in safety features, a clean control bar design and a simple easy-to-use trimming system.
Push Away Quick Release – The control system features a new pushaway quick release safety with total flag out of the kite. The release handle is ergonomic with positive release forces (under 8kg) allowing for quick and easy release. Simple re-assembly saves time and gets you back up and riding faster.
Anti-twist 100% Flag Out Line – The flag out line running through the Megatron & safety leash attachment at the bottom keeps the leash tangle free when doing rotations and manually unwinding the centre lines using the Spinning Handle.
Low Friction Centre Piece – The control bar features a low friction aluminum centre piece designed to reduce trim line wear.
Auto Positioning Chicken Loop – Designed in conjunction with the bar centre piece, the Megatron spinning handle allows chicken loop auto positioning, offering easy unhooked riding and hooking back in.
Easy to Grab Stall Handle: Making self landing, reverse launch and inflation easier.
The R1 Control System bar sizes come in 38cm, 45cm, 50cm and 55cm.
R1 Control Bar Sizes:
6m / 7m: 38cm Contact Control Bar
8m / 9m: 45cm Contact Control
Be the first to review this product!
Help Centre Topics
Copyright © 2019, Powerkiteshop :: All Rights Reserved