home
 
Get 10% Off! enter EASTER10 at the checkout!

Peter Lynn Twister 4 (IV) : £258.95 - £428.95

Availability: In stock

Your Price: £258.95
Reward Points Policy Earn at least 0 Points for buying this product.

* Required Fields

Your Price: £258.95
Peter Lynn Twister 4 (IV)

More Views

  • Peter Lynn Twister 4 (IV)
  • Peter Lynn Twister 4 (IV) - 3.0m
  • Peter Lynn Twister 4 (IV) - 4.0m
  • Peter Lynn Twister 4 (IV) - 5.5m
  • Peter Lynn Twister 4 (IV) - 7.5m
  • Peter Lynn Twister 4 (IV) - Handles Package
  • Peter Lynn Twister 4 (IV) - Control Bar Package
  • Peter Lynn Twister 4 (IV) - Range
  • Peter Lynn Twister 4 (IV) - Wind Range
  • Diagonal Ribs: Placed between the profiles to distribute the load of the bridle connection over multiple profiles, this technique makes it possible to use a lot less bridling than on conventional foil kites
  • Velcro Bridle Loops; Tangle free storage, a stress free start of every session. The Velcro bridle loop is located on the middle profile of the kite, it’s purpose is to secure the bridles and keep them tangle free when the kite is not in use.
  • Velcro Dirt-Outs; Keep it dirt free. When setting up your kite there is always a chance that sand or other debris gets inside the kite, this of course can disrupt the flight characteristics. Sand and other debris tends to accumulate in the wingtips where
  • Webbing Reinforced Air-Intakes; The webbing is folded and stitched into the leading edge which results in a very strong and crash proof construction. The materials used in this construction are light and help keeping the shape of the air inlets from disto
  • Pre-stretched Stitched Dyneema Bridle; No need to ever adjust the bridles. This results in a bridle which is not only very thin to prevent unwanted drag which improves performance. The Dyneema® bridle is pre-stretched, meaning that throughout the life of
  • Durable 40D Mirai ripstop nylon top & bottom skin and strong 70D profiles. Mirai has a soft protective coating that adds to its durability and ensures smooth shaping when its under pressure. The profiles are made out of 70D Mirai ripstop nylon which holds
  • Zig-Zagged Brake Bridle Points; The brake bridle points are sewn onto and then folded into the trailing edge of the kite, making a very strong and secure connection. To enhance this already strong connection even further the bridle points are secured in p
  • Stitched Dynacore Bridle Loops; The bridle loops are stitched to reduce unwanted drag and to create a clean connection to minimize the chance of the line snagging and / or tangling.
  • Double Stitched Seam Flat on Profile; The seams on the bottom skin are sewn flat onto the profiles with a double needle sewing machine, this construction method is used to further strengthen and enhance the overall build quality of the kite.
  • Peter Lynn Twister 4 (IV) - 3.0m
  • Peter Lynn Twister 4 (IV) - 4.0m
  • Peter Lynn Twister 4 (IV) - 4.0m
  • Peter Lynn Twister 4 (IV) - 4.0m
  • Peter Lynn Twister 4 (IV) - 5.5m
  • Peter Lynn Twister 4 (IV) - 5.5m
  • Peter Lynn Twister 4 (IV) - 5.5m
  • Peter Lynn Twister 4 (IV) - 5.5m

  • Product Description
  • Specs
  • Handles
  • Control Bar
  • Reviews
Product Description Specs Handles Control Bar Reviews

Setup Options

Available complete with 4-Line Handles or 4-line control bar: 

Peter Lynn Twister 3 2013 Storage Bag

Peter Lynn Twister 4 Kite Storage Bag: 
Waterproof style stuff sack with drawstring.


 

Peter Lynn Twister 3 2013 Sail

Peter Lynn Twister 4 Kite:
Chikara, kite complete with pre-sleeved bridles



Peter Lynn Twister 3 2013 Dyneema Flying Lines

Peter Lynn Twister 4 Dyneema Flying Lines:
Pre-stretched flying lines. Colour-coded for safety and ease of use.

 

Peter Lynn Twister 3 4-Line Handles and Safety System

Peter Lynn Twister 4 4-Line Handles:
Aluminium handles with soft foam for extra grip and ground stake loops.

 

 

Peter Lynn Twister 3 4-Line Handles and Safety System

Peter Lynn Twister 4 Wrist Leash Safety System:
Wrist-mounted de-power system enables you to let go of your quad handles when overpowered and recover your kite.

Peter Twister 3 4-Line Control Bar and Safety System

Peter Lynn Twister 4 4-Line Control Bar:
Wrist-mounted de-power system enables you to let go of your control bar when overpowered and recover your kite.
Central webbing trim system with pulley to allow brakes to run freely during aggressive steering.

Peter Lynn Twister 3 2013 Groundstake

Peter Lynn Twister 4  Groundstake:
A must for all power kiting traction activities allowing for quick peg-down of your kite.

 


Peter Lynn Twister 2 (II) R Manual Sticker Voucher

Also Includes: 
Instructions and Sticker.

 

 

Technology

Peter Lynn Twister Technology:

Diagonal Ribs:
Placed between the profiles to distribute the load of the bridle connection over multiple profiles, this technique makes it possible to use a lot less bridling than on conventional foil kites

Profile & Aspect Ratio:
The D-ribbed centre section of the Peter Lynn Twister 3 (III) increases the smooth, clean shape of the canopy to optimise speed and eliminate distorting without the use of extra bridles. Each size of the Peter Lynn Twister 3 has been specifically designed to keep the same flying feeling and characteristics throughout the entire range.

Velcro Bridle Loops:
Tangle free storage, a stress free start of every session. The Velcro bridle loop is located on the middle profile of the kite, it’s purpose is to secure the bridles and keep them tangle free when the kite is not in use.

Velcro Dirt-Outs:
Keep it dirt free. When setting up your kite there is always a chance that sand or other debris gets inside the kite, this of course can disrupt the flight characteristics. Sand and other debris tends to accumulate in the wingtips where it can be removed through the Velcro dirt-outs.

Webbing Reinforced Air-Intakes:
The webbing is folded and stitched into the leading edge which results in a very strong and crash proof construction. The materials used in this construction are light and help keeping the shape of the air inlets from distorting.

Pre-stretched Stitched Dyneema Bridle:
No need to ever adjust the bridles. This results in a bridle which is not only very thin to prevent unwanted drag which improves performance. The Dyneema® bridle is pre-stretched, meaning that throughout the life of the kite you will never have to adjust anything, making adjustable bridles obsolete.

Durable 40D Mirai ripstop nylon top & bottom skin and strong 70D profiles.
Mirai has a soft protective coating that adds to its durability and ensures smooth shaping when its under pressure. The profiles are made out of 70D Mirai ripstop nylon which holds shape much better and is much stronger to prevent profiles from ripping in hard crashes.

Zig-Zagged Brake Bridle Points:
The brake bridle points are sewn onto and then folded into the trailing edge of the kite, making a very strong and secure connection. To enhance this already strong connection even further the bridle points are secured in place with zigzagged stitching.

Stitched Dynacore Bridle Loops:
The bridle loops are stitched to reduce unwanted drag and to create a clean connection to minimize the chance of the line snagging and / or tangling.

Double Stitched Seam Flat on Profile:
The seams on the bottom skin are sewn flat onto the profiles with a double needle sewing machine, this construction method is used to further strengthen and enhance the overall build quality of the kite.

Video

Peter Lynn Twister Video:

DO YOU WANT
10% OFF
YOUR NEXT ORDER?
Subscribe to our newsletter and get your discount code
Code: df56s5d8