Core Sensor 4 Pro Control Bar - Powerkiteshop
Core Sensor 4 Pro Control Bar - Powerkiteshop
Core Sensor 4 Pro Control Bar - Powerkiteshop
Core Sensor 4 Pro Control Bar - Powerkiteshop
Core Sensor 4 Pro Control Bar - Powerkiteshop
Core Sensor 4 Pro Control Bar - Powerkiteshop

Core Sensor 4 Pro Control Bar

Tax included
Successfully sent

Core Sensor 4 Pro Control Bar

£779.00 GBP


Name should not be empty
Your email address is not valid.
Your phone number is not valid.
Message content should not be empty.


Witness next-level innovation, functional design, and clean aesthetic in the carbon powered Sensor 4 Pro – based on the same great achievements of the Sensor 4 Bar it has been raised to a new level in terms of safety, functionality and versatility. However, with its high-tech features such as the carbon bar and the Tectanium 2 Vario Lines, it goes a big step further.

The Sensor 4 Pro Bar has received an IKO tested SFS+ Safety. When the Quick Release is activated, the bar moves immediately to the kite with both backlines and a frontline. The kite blows out without pressure on only one front line (safety line) without any residual pull. This safety is suitable for fixed bridled kites such as the Pace Pro as well as pulley bridled kites (all other Core kite models). In combination with our 4:1 adjuster, this is one of the safest safety systems on the market.

The Sensor 4 Bar offers the possibility to switch between a low V and a high V (or Y). While all Core kites are optimized for a high V, a deep V offers advantages for radical action with short lines from 12 meters and can be combined with many kites on the market. Core recommend flying all Core models with a high V.

The Sensor 4 Pro Bar also has universal pigtails. This not only makes it easier to cut your bar to length, but also connects it to many other kites on the market.

Sensor 4 Pro Control Bar:

46.5-50cm Bar with 24m-22m-20m-18m vario line length options, leash, bar bag and manual.


Wind Range
Auto Untwist:

The Auto Untwist of the Sensor 4 Pro ensures that you always have perfectly sorted front lines. Thanks to the extremely low-friction and low-wear ceramic ball bearing below the Quick Release, the Sensor 4 Pro Bar always unscrews the lines immediately. Without any action on the part of the rider. The result: optimal power flows in every situation and outstanding durability in salt water and sand.

4:1 Adjuster:

The force required to operate the adjuster is quartered by sophisticated deflections, allowing for smooth, precise angle adjustments with minimal effort, even in the strongest winds. The integrated elastic band automatically shortens the adjuster rope for added convenience.

Stealth Winders:

The hinged winders offer a flight and a storage option. After the lines have been unwound from the bar, the winders can be easily folded in for flight mode. Smooth transitions without hard edges. 


The narrow, non-slip asymmetric grip is easy on the hands – even for marathon sessions. Contrasting colors provide improved left/right visual guidance. And a thin redline on the underside lets you know if the bar is reversed.

Bar Width:

The bar width of the Sensor 4 Pro can be adjusted between 50 cm / 46.5 cm with a click of the finger. This is made possible by the rotatable control line suspension hidden in the bar ends. In this way, you can optimally adapt your Sensor 4 Pro to the entire size range.

Tectanium 2 Flying Lines:

For the flying and control lines, the Sensor 4 Pro Bar uses the high-tech material Tectanium® 2, which has been developed exclusively for CORE, for even higher abrasion resistance and durability. The silver line set is thinner and lighter than the standard line, but still achieves a breaking load that is around 50 percent higher. Above all, the fourfold higher stretch resistance ensures an unrivalled precise and direct control and flight feel.

The variable line set has a basic length of 18 meters and has line extensions in two- and four-meters length. Depending on preference or area of use, it is possible to switch between line lengths of 18, 20, 22 and 24 meters in just a few simple steps. 

CIC Quick Release:

The ISO-compliant CORE Intuitive-Connect QR is designed to work effectively even in the most critical situations and can be intuitively released under load as well as with sagging lines. The QR body is made of carbon-fibre-reinforced high-performance plastic and V4A steel at its core. The revised cap of the QR offers a good grip without the risk of accidentally getting caught with the wetsuit. After a trigger, the system is ready for use again in a flash with just one click. The revised locking mechanism with green marking line for easier control prevents false triggering due to loops that are not clicked in correctly. 

Griploc 2:

The new EVA base is both more abrasion-resistant and more comfortable and durable. It ensures a non-slip, comfortable hold at the bar. Thanks to the calming colour scheme and a red line on the back, the correct position of the bar can be seen at first glance at any time.

Carbon Soul:

Thanks to the use of a carbon fibre composite, the handlebar of the Sensor 4 Pro Bar is incredibly light, but at the same time extremely stiff, which is noticeable in the form of an unprecedentedly direct steering feel. Kitesurfing has never been more precise! 

Titanium Carrier:

The titanium carrier in the handlebar ensures extreme rigidity and a particularly crisp flight feeling. In addition to a significant increase in breaking load, it enables double line guidance in the centre with interchangeable inserts.

Short Safety Release:

All Core bars are supplied with the ISO-compliant Short Safety Leash as standard. At only 55 centimetres , it is pleasantly short, yet elastic for comfortable hooking, and guarantees that the release mechanism is always within easy reach of the rider's field of vision at the front of the harness.

Free Floaters:

The floaters are positioned a few centimetres above the bar, unattached, providing a unique, smooth, and dynamic sensor control experience. Their new shape enhances the bar's floatability with increased volume. An inner grip surface ensures an intuitive and direct hold for easier kite relaunching. Additionally, the line above the floater is encased in a tube to maintain optimal positioning even without tension.

Spliced Ends:

A special detail of the sensor lines are the spliced line ends. They are not simply secured by parallel seams, but are elaborately spliced before sewing. This guarantees higher strength and more favourable aerodynamics – laying out the lines is also smoother.


The multi-purpose barbag offers protection for your shiny Sensor 3S Pro bar when you're on the road. Accessories, tools, spare parts, line extensions, and optional loops can be stored in the bag's compartments. The mesh insert on the back guarantees proper ventilation. Fold it away or hang it up in a visible spot, so you don't forget it.

Control Bar