Back Line Turning:
SHEETED IN The back line is released and the forces go through the front connector. The bar pressure increases and the maneuvrability is less direct. It offers a very progressive bar with a feeling of a sheeted out back connector while we sheet in, therefore the pressure increases progressively.
SHEETED OUT The kite tilts and the back line stiffens. The tensions move to the trailing edge which has several effects: - less flapping - better start - maneuvrability with less pressure.
Flat Sewing:
Stronger assembly of the panels: they are now glued and sewn together to make the canopy more rip resistant.
Streamlined Leading Edge End Tips:
The leading edge tips benefit from a reduced diameter, they are streamlined to lower the drag and equipped with a strap to avoid bridle tangling
Trailing Edge:
The internal outline of the trailing edge panels is no more linear but with a series of arches.
In the centre, DACRON has been replaced by a double layer of canopy fabric which improves spreading the tensions, maintaining the profile and brings new gains in stability and performance.
Vertical Strut Cut:
The kite's struts are designed with a vertical cut in order to optimize the strength / diameter ratio.
F-One Pulley:
Pulley structure is extremely resistant.
Bridle is integrated in the lower part of the pulley, working in its axis and not sideways.
Pulleys can be removed independently from the bridle, you can change the bridle and keep the pulley or vice versa.
Kevlar Reinforcement:
Most seams on the leading edge are protected with an abrasion-resistant Kevlar® fabric to prevent the seams from deteriorating when the kite's profile is subjected to aggressive ground friction
One-Pump Collar Valve:
Easier to remove and put back.
Convenient for bladder replacement.
Technoforce:
TECHNOFORCE™ of TEIJIN is a high density Polyester fabric with a tear stopping structure using thin and high tension yarn.