Mystic Kiteboarding design wetsuits specifically for kitesurfers. Compromise and multi-use constraints are not an issue, their wetsuits are designed for kitesurfers by kitesurfers that incorporate features other wetsuit designers wouldn't think of
The Fox Fleece lining on the Marshall's chest and back panels will keep your core and upper body warm even in the chilliest of sessions. Mystic have also added 4-way stretch hex-tech kneepads and a shin protection layer. Glued blind stitched seams and critical taping on the inside are added to keep warm water in and cold water out.
The Mystic Marshall Wetsuit gives you value for money in a durable suit loaded with tons of features to make the Marshall a real bargain. The suit is developed for riders who like to standout and separate themselves from the pack. In order to lead and not follow you have to look different while pulling your tricks on the water. The Marshall comes in two colours options topped off with a stylish all over print.
For the kiter who wants to ride all winter!
Suitable for waters 5°C and above.
Construction:
- Fully Glued and Blind-Stitched Water Sealing:
Stitching method whereby the panels are first glued together and then only stitched halfway through the fabric instead of fully perforating it, which makes the seams waterproof.
- Waterproof Stretch Taping 50%:
A neoprene taping is positioned on the critical seams of the suit. This prevents water from coming through the seams on critical points of the human body.
- Fox Fleece Lining:
Big loops in the fabric create a high pile lining that holds air for extra insulation. It holds less water enhancing the fast-drying abilities of this fabric. With its superior stretch performance in all directions it's super suitable for every panel in all of our suits.
- Critical Taping:
A neoprene taping positioned on the critical seams of the suit.
- Non-Slip Cuffs:
A silicon print located inside the cuff, to keep your cuffs in position and prevent water from coming in.
- Curved seam ends
- Glued stitching ends
Features:
- Front-Zip Entry:
Positioned on the front of the wetsuit, this construction provides an easy entry. Providing much more stretch for your back allowing for more freedom of movement.
- Shinn Protection:
An EVA padding to protect your shins from board impacts.
- Blind Zip
- PK Zip - Featuring a strong waterproof zipper.
- Aquaflush:
Perforated neoprene that allows water to exit the suit, preventing the leg cuffs from filling up with water.
- Key Pocket:
Internal nylon key pocket, located on the inside of the suit.
- Hex-Tec Knee Pads:
Kneepads made using highly durable materials, which have tightly woven fibres for better scratch prevention. Complete with ergonomic shaping designed to extend the life of the wetsuit and protect the knees while punching through the waves.
- Separate Velcro Leg Straps:
For an even tighter seal. If needed the velcro loop avoids any intrusion of water by perfect adjustment. In the unlikely case that the loop releases on the water it can not get lost due to its unique construction. Of course the Velcro Loop can be removed easily if not needed.
- 5mm - Body / 3mm Arm/Legs
How does a wetsuit work?
A wetsuit creates a barrier against the elements utilizing the insulating properties of closed cell neoprene. Neoprene is a closed cell foam made up of thousands of tiny air bubbles known as cells. The air within the cells creates an insulating barrier which slows down the conduction of heat and cold and allows body heat to be retained.
Neoprene:
The thickness of the neoprene utilized in a wetsuit will determine its warmth and flexibility. A thick wetsuit provides a lot of insulation but can inhibit flexibility. A thin wetsuit will be very flexible but can inhibit insulation. The key is to get the right combination of warmth and flexibility so the wetsuit will not only keep you warm, but provide maximum flexibility as well.
What is a steamer wetsuit ?
A 'Steamer' is a wetsuit with sealed seams, usually achieved by blind stitching. This stops the majority of cold water from re-entering the suit once your body has initially heated it up. Winter wetsuits are steamers typically with a 5mm body and legs for warmth and 3mm arms for manoeuvrability.
Average European Water Temperatures |
Belguim 8°C |
Germany 6°C |
Portugal 17°C |
Bulgaria 10°C |
Greece 15°C |
Romania 9°C |
Croatia 16°C |
Iceland 5°C |
Slovenia 12°C |
Cyprus 18°C |
Italy 15°C |
Spain 16°C |
Denmark 6°C |
Ireland 10°C |
Sweden 2°C |
Estonia 3°C |
Latvia 2°C |
UK 10°C |
Finland 2°C |
Netherlands 8°C |
|
France 13°C |
Norway 4°C |
|
Popular Worldwide Destinations
|
Australia 20°C |
Brazil 25°C |
Egypt 23°C |
Kenya 29°C |
Morocco 17°C |
South Africa 17°C |
USA/UK
|
Euro
|
Height (cm)
|
Chest (cm)
|
Waist (cm)
|
XS
|
46
|
165-171
|
87-92
|
69-76
|
S
|
48
|
169-175
|
91-96
|
73-80
|
M
|
50
|
174-180
|
95-100
|
77-84
|
MT
|
98
|
180-185+
|
95-100
|
77-84
|
L
|
52
|
180-185+
|
99-104
|
81-88
|
LS
|
25
|
174-180+
|
99-104
|
81-88
|
LT
|
102
|
183-189+
|
99-104
|
81-88
|
XL
|
54
|
183-189+
|
103-108
|
85-92
|
XXL
|
56
|
187-193+
|
107-112
|
89-96
|
XXXL
|
58
|
195+
|
111-116
|
93-98
|